Order Products : sales@su-jiao.com
Epoxies, Ect. 50-3170
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | f7yBL7_Epoxies-Ect-50-3170.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. 50-3170 can be used for bonding sensitive components or for potting of power supplies, coils, glass diodes, and other delicate assemblies. This new formulation can be used successfully for transformers, regulators, PCB's, etc... 50-3170 is an ideal resin system for encapsulation of electronic packages with low stress requirements. The resin has a rubber consistency and retains its properties and flexibility on long term aging. This allows pottings and castings to be probed for detection of electrical failure. 50-3170 is a repairable system. After defective components have been located, the probe path can be totally sealed by applying fresh resin with a hypodermic syringe. 50-3170 will bond to itself forming a totally sealed system. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 1.7 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 15000 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -70.0 to 150 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 4.0 | ||
| Density (25°C) | 1.90 | g/cm³ | |
| Curing Time | |||
| 66°C | 2.0 to 4.0 | hr | |
| 23°C | 24 | hr | |
| Gel Time | 1.4E+3 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 90 | ||
| Tensile Elongation at Break | 24 | % | |
| Electric Strength | 19 | kV/mm | |
| Relative Permittivity (60 Hz) | 3.40 | ||
| Volume Resistivity | 1.5E+14 | ohms·cm | |
| Dissipation Factor (60 Hz) | 0.20 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Visico™ LE4421/LE4460/LE4432 | Borealis AG | XLPE | Visico™ |
| Vyncolit® EM7400-2 | Vyncolit N.V. | Epoxy | Vyncolit® |
| Novalloy-B B4720 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
| DURACON® EW-02 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| KumhoSunny AES HW600G | Shanghai KumhoSunny Plastics Co., Ltd. | AES | KumhoSunny AES |
