Order Products : sales@su-jiao.com

THERMOLAST® K TF4BTL (Series: FC/AP)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® K
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	f4WPRx_THERMOLAST-K-TF4BTL-Series-FC-AP-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The FC/AP Series is your natural-colored and translucent material solution for applications with food contact. The series' features include an excellent adhesion to PP.

Typical applications

Function and design elements

Grip applications

Household articles

Packaging (for food and careproducts)

Razors

Seals

Toothbrushes

Toys

Material advantages

Adhesion to PP

Applications with food contact

Easy coloring (compounds in natural colors)

EN71/3

Excellent mechanical properties

Excellent processing behavior

FDA compliant

Halogen-free

In natural or translucent available

Pleasant surface feel (Soft touch)

Recyclable

Regulation (EU) 10/2011

General Information
Features	Food Contact Acceptable Good Adhesion Good Processability Halogen Free Recyclable Material Soft
Uses	Food Packaging Household Goods Non-specific Food Applications Packaging Seals Toothbrush Handles Toys
Agency Ratings	EN 71-3 EU 10/2011 FDA Unspecified Rating
Appearance	Translucent
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.880	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	40		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	7.70	MPa	ISO 37
Tensile Elongation ²(Break)	830	%	ISO 37
Tear Strength ³	9.2	kN/m	ISO 34-1

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	180	°C
Middle Temperature	200	°C
Front Temperature	220	°C
Mold Temperature	25.0 to 40.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)

Resin Grade	Manufacturer	Category	Trademark
Salflex 520TM	Salflex Polymers Ltd.	HDPE	Salflex
Ming Dih EPS SB-211	Ming Dih Group Corporation	PS (EPS)	Ming Dih EPS
APEX® 90-A472R-55-NT	Teknor Apex Company	PVC, Flexible	APEX®
GAPEX® FPP40GQ07NA	Ferro Corporation	PP, Unspecified	GAPEX®
Jamplast EX-03	Jamplast, Inc.	PVC, Unspecified	Jamplast