Order Products : sales@su-jiao.com
FLEXITEQ™ F70A060
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | f1GMSp_FLEXITEQ-F70A060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F70A060 is a formulation based on Santoprene™ rubber technology. It is formulated for extrudability, grain retention and incorporates soft-touch and good tear resistance in a pre-coloured material. This material can be processed on conventional thermoplastic equipment for extrusion or injection moulding. It is polyolefin based and is completely recyclable. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 6.20 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 480 | % | ASTM D412 |
| Tear Strength 3(23°C) | 31.0 | kN/m | ASTM D624 |
| Compression Set 4(23°C, 70 hr) | 29 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 60.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 160 - 180 | °C | |
| Middle Temperature | 170 - 200 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Back Pressure | 5.00 - 20.0 | MPa |
| Injection instructions |
|---|
| Typical Mesh Screen Combination: 20/40/60 |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKALOY™ G70A3 | Mando Advanced Materials Co., Ltd. | PC+ABS | TEKALOY™ |
| Beamset 371 | Arakawa Chemical Industries, Ltd. | Epoxy | Beamset |
| Hipolyene 2703 MS | Zylog Plastalloys | TPO (POE) | Hipolyene |
| POLYCOMPO PE SP2540 | POLYCOMPO Co.,Ltd. | LLDPE | POLYCOMPO PE |
| POLYform C M270 UV | Polykemi AB | Acetal (POM) Copolymer | POLYform C |
