Order Products : sales@su-jiao.com
COBIFOAM 0
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | M&G Gruppo Mossi & Ghisolfi |
| Trademark: | COBIFOAM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | evyZX9_COBIFOAM-0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| COBIFOAM 0 resin is a food grade PET homopolymer, based on terephthalic acid. Its high melt strength make it well suited for the production of expanded sheets, boards, panels, profiles and beads. Foam sheet can be thermoformed into trays for ovenable and dual ovenable applications. After crystallization the foamed products can withstand temperature exceeding 200°C (390 °F) for short time and are susceptible to mechanical finishing. Scraps of foamed products obtained by COBIFOAM 0 can be re-used in extrusion without significant I.V. loss. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.88 | g/cm³ | ASTM D1895 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 257 | °C |
| Additional Information |
|---|
| Intrinsic viscosity (.V.), C. 01/F, +/- 0.100: 1.25 dl/gCrystalline Density, C.04, +/- 0.1: 1.4 g/milMelt Flow Index, C17, +/- 3: 14.5 g/10minColor (b value), C.09: +2 Max.Melting point, MGPI 007, +/- 2: 257°CBulk Density, C16, +/- 5%: 880 Kg/m³ |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 209 MS | RTP Company | Nylon 66 | RTP |
| SEALUTION™ 140 Peel Polymer | The Dow Chemical Company | POP | SEALUTION™ |
| Shin-Etsu Elastomer KE-3611U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Zytel® 80G43HS1L BK104 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| APEX® RM 8908 | Teknor Apex Company | PVC, Rigid | APEX® |
