Order Products : sales@su-jiao.com
DAI-EL™ G-7201
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | evwhfN_DAI-EL-G-7201.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-7201 is a cure-incorporated copolymer designed for injection transfer and compression molding applications. G-7201 offers low Mooney viscosity with good compression set resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | ASTM D792 |
| Mooney Viscosity (ML 1+10, 121°C) | 19 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.20 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 13.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 240 | % | ASTM D412 |
| Tear Strength (25°C) | 23.8 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 25°C, 70 hr | 11 | % | ASTM D395 |
| 100°C, 70 hr | 9.0 | % | ASTM D395 |
| 175°C, 70 hr | 10 | % | ASTM D395 |
| 200°C, 70 hr | 13 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (230°C, 70 hr) | 0.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (230°C, 70 hr) | 8.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 230°C, 70 hr) | 2.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -17.0 | °C | ASTM D746 |
| Additional Information |
|---|
| All tests performed were performed under DAIKIN test methodsFluorine Content: 66%Curing characteristic, Measuring Temperature: 170°CCuring characteristic, Curelastomer: 4.6 minGehman torsion test, T2: -5.0°CGehman torsion test, T10: -14.5°CTR test, TR10: -18°CTR test, TR70: -6°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM PE 4406 | Ponachem Compound GmbH | HDPE | PONACOM PE |
| THERMOLAST® K TC8TPZ (Series: GP/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| BESTPOM C09T/01 | Triesa Plastics | Acetal (POM) Copolymer | BESTPOM |
| Andur 6500 DPLF | Anderson Development Company | PUR-Ether/TDI | Andur |
| MAJORIS DG308X | AD majoris | PP, Unspecified | MAJORIS |
