Order Products : sales@su-jiao.com
VENYL UFC300
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | AD majoris |
| Trademark: | VENYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | evQ8Tw_VENYL-UFC300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VENYL UFC300 is a 30 % carbon fibre reinforced polyamide 66 intended for Injection moulding. APPLICATIONS VENYL UFC300 has been developed especially for demanding applications for good resistant final parts and rigidity combined with good stiffness and heat stabilization. Products requiring excellent combination between thermal and mechanical properties. VENYL UFC 300 is available only in black (VENYL UFC300). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.20 to 0.40 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.8 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 16300 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 194 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
| Flexural Modulus | 17800 | MPa | ISO 178 |
| Flexural Stress | 286 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 40 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 255 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 250 | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 256 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 | ohms | DIN 53482 |
| Volume Resistivity | 1.0E+4 | ohms·cm | DIN 53482 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 285 to 300 | °C | |
| Middle Temperature | 280 to 295 | °C | |
| Front Temperature | 275 to 290 | °C | |
| Nozzle Temperature | 265 to 280 | °C | |
| Mold Temperature | 90.0 to 120 | °C | |
| Injection Pressure | 85.0 to 110 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 50.0 to 70.0 | MPa | |
| Screw L/D Ratio | 15.0:1.0 to 20.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Scolefin 13 G 10-9 | Ravago Group | PP Homopolymer | Scolefin |
| NEFTEKHIM PP 8440G (EPS31HP) | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| Bergamid™ A700 G25 U-S01 NC041 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| LEXAN鈩?EXL1810T resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Plaskon MUF-2A LAR | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
