Order Products : sales@su-jiao.com
Andur 90 AP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eqQVyn_Andur-90-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 90-AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 90 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 7.58 | MPa | ASTM D412 |
| 300% strain | 14.5 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 44.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Compression Set | 30 | % | ASTM D395B |
| Bayshore Resilience | 48 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 9.0 - 11 | min | |
| Demold Time (100°C) | 25 - 30 | min | |
| Post Cure Time (100°C) | 3.0 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 88 to 92Die C Tear, ASTM D1004: 500 pliAverage Split Tear, ASTM D1938: 110 pliStoichiometry Curative Level: 95%Cure Time, 150 to 160°F: OvernightMix Temperature: Andur 90 AP: 180-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 A 2035/509 GF35 LV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Kingfa APO-2004 | Kingfa | PP, Unspecified | Kingfa |
| Infino SC-1100R | SAMSUNG SDI CO., LTD. | PC | Infino |
| Sylvin 5132-75 Clear Green 3157 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® BC 304 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
