Order Products : sales@su-jiao.com
Petrothene® XL07414
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eop0u2_Petrothene-XL07414.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PETROTHENE XL 07414 is especially formulated for use in flame retardant primary insulation for low voltage automotive wire and cable applications (SAE J1128), and for UL applications including 125°C appliance wire and SIS. XL 07414 is a non-tarnishing, non-halogenated, flame retardant chemically crosslinkable compound. Small wire gauges, such as 20-24 AWG, insulated with XL 07414 exhibit higher strip forces than wire insulated with XL 07407. Non-discoloring antioxidant and special active peroxide have been added to ensure thermal stability during processing and optimum curing results. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 220 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (165°C, 168 hr) | 1.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (165°C, 168 hr) | -2.0 | % | ASTM D573 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 107 - 113 | °C | |
| Cylinder Zone 2 Temp. | 107 - 113 | °C | |
| Cylinder Zone 3 Temp. | 107 - 113 | °C | |
| Adapter Temperature | 113 - 118 | °C | |
| Melt Temperature | 116 - 127 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 235 to 245°FScrew Cooling: 180°F, if needed to control melt temperatureDie Cooling: 90 to 120°F to control die droolMaximum screen pack of 40 meshLittle or no die landNo predrying normally requiredCompression Ratio: 2 to 3:1Curing line steam temperature should be at least 400°F. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Veroplas VGR30 | PlastxWorld Inc. | ABS | Veroplas |
| Arnite® AV2 370 HF | DSM Engineering Plastics | PET | Arnite® |
| Duratron® T4301 (EXTRUSION) | Quadrant Engineering Plastic Products | PAI | Duratron® |
| DynaMix™ 1727 | Polymer Dynamix | PC+PBT | DynaMix™ |
| Kangxi® PET-30GF | Wuxi Kangxi Plastics Technology Co.,Ltd. | PET | Kangxi® |
