Order Products : sales@su-jiao.com
Telcar® TL-2895E X (PRELIMINARY DATA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eoEpv1_TelcarTL2895EXPRELIMINARYDATA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®TL-2895E X (PRELIMINARY DATA) is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Telcar®The main features of TL-2895E X (PRELIMINARY DATA) are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.878 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 5.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 1 sec | 85 | ASTM D2240 | |
| Shaw A, 5 seconds | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| Transverse flow : 100% strain | 4.08 | MPa | ASTM D412 |
| Flow : 100% strain | 5.81 | MPa | ASTM D412 |
| Transverse flow : 300% strain | 5.19 | MPa | ASTM D412 |
| Flow : 300% strain | 7.19 | MPa | ASTM D412 |
| Tensile Strength 2 | ASTM D412 | ||
| Transverse flow : Fracture | 18.1 | MPa | ASTM D412 |
| Flow : Fracture | 10.1 | MPa | ASTM D412 |
| Tensile Elongation 3 | ASTM D412 | ||
| Transverse flow : Fracture | 810 | % | ASTM D412 |
| Flow : Fracture | 580 | % | ASTM D412 |
| Tear Strength 4 | ASTM D624 | ||
| Transverse flow | 58.7 | kN/m | ASTM D624 |
| Flow | 55.5 | kN/m | ASTM D624 |
| Compression Set 5 | ASTM D395B | ||
| 23°C, 22 hr | 23 | % | ASTM D395B |
| 70°C, 22 hr | 79 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 216 | °C | |
| Middle Temperature | 213 - 221 | °C | |
| Front Temperature | 221 - 227 | °C | |
| Nozzle Temperature | 221 - 229 | °C | |
| Processing (Melt) Temp | 221 - 229 | °C | |
| Mold Temperature | 25 - 66 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 - 210 | °C | |
| Cylinder Zone 2 Temp. | 199 - 216 | °C | |
| Cylinder Zone 3 Temp. | 213 - 221 | °C | |
| Cylinder Zone 5 Temp. | 221 - 227 | °C | |
| Die Temperature | 221 - 229 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Note Message | |
|---|---|
| 1 . | C mold, 510mm/min |
| 2 . | C mold, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nypol® PA A3 G33 HS UV PRTA011 NR351 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Caltex PP M540S | GS Caltex | PP Impact Copolymer | Caltex PP |
| ELASTOSIL® RT 685 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® RT |
| OmniTech™ ASA 407 HSV | OMNI Plastics, LLC | ASA | OmniTech™ |
| PEARLSTICK® 45-60/08 | Lubrizol Advanced Materials, Inc. | TPU-Capro | PEARLSTICK® |
