Order Products : sales@su-jiao.com
MTM® 49-3
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | MTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eo949p_MTM-49-3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MTM49-3 is an 80 to 160°C (176 to 320°F) curing, toughened epoxy prepreg resin system developed specifically for the manufacture of components. MTM49-3 prepregs exhibit excellent ambient and hot mechanical performance combined with good impact resistance after only moderate cure cycles making them ideal for use in the motorsport industry. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.22 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 95.0 | °C | |
| -- 3 | 190 | °C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | DMA E' onset Tg, 16 hours at 80°C (176°F), dry |
| 3 . | DMA E' onset Tg, Maximum dry Tg |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2408 | Covestro - Polycarbonates | PC | Makrolon® |
| Radilon® A HS 164 NAT | Radici Plastics | Nylon 66 | Radilon® |
| Viton® B-202 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Bergamid™ B70 G33 U GR258 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| CoREZYN® COR31-DA-470 | Interplastic Corporation | Polyester, TS | CoREZYN® |
