Order Products : sales@su-jiao.com
Grilamid® 1S XE 4224 nat
| Category: | Nylon 1010 , Polyamide 1010 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eiTQC6_Grilamid-1S-XE-4224-nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid® 1S XE 4224 nat is a Polyamide 1010 (Nylon 1010) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for cast film or extrusion. Important attributes of Grilamid® 1S XE 4224 nat are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.04 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 2.1 | -- | % | |
| Equilibrium, 23°C, 50% RH | 1.0 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 110 | 80.0 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2000 | 1300 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 55.0 | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 5.0 | 20 | % | ISO 527-2 |
| Nominal Tensile Strain at Break | 30 | 45 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 7.0 | 6.0 | kJ/m² | |
| 23°C | 6.0 | 9.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ||
| 23°C | No Break | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 125 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 50.0 | -- | °C | ISO 75-2/A |
| Melting Temperature 1 | 200 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 1.1E-4 | -- | cm/cm/°C | |
| Transverse | 8.0E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 38 | 38 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.800 mm) | HB | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA 1010, G, 18-020 | -- | ISO 1874 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinko-Lac® ASA S710 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| Acculam™ Epoxyglas G11/FR5 | Accurate Plastics, Inc. | Epoxy | Acculam™ |
| ALCUDIA® LDPE PE-023 | REPSOL | LDPE | ALCUDIA® LDPE |
| Hypro® PPC-T20 | Entec Polymers | PP Copolymer | Hypro® |
| INSTRUC PEIGF20 | Infinity LTL Engineered Compounds | PEI | INSTRUC |
