Order Products : sales@su-jiao.com
SMOKEGUARD™ O 204 NATURAL
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ecO0yl_SMOKEGUARD-O-204-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SMOKEGUARD O-204 IS A PLENUM CABLE SPLINE COMPOUND. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 - 1.56 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 60 - 66 | ASTM D2240 | |
| Shaw D, 15 seconds | 51 - 57 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 12.4 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 15 | % | ASTM D412 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 100 MHz | 3.34 | ASTM D150 | |
| 23°C, 200 MHz | 3.34 | ASTM D150 | |
| 23°C, 350 MHz | 3.34 | ASTM D150 | |
| 23°C, 600 MHz | 3.33 | ASTM D150 | |
| 23°C, 1.00 GHz | 3.32 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 100 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 200 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 350 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 600 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 1.00 GHz | 1.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 38 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Adapter Temperature | 193 | °C | |
| Melt Temperature | 193 - 204 | °C | |
| Die Temperature | 193 | °C |
| Extrusion instructions |
|---|
| Screw Design: General purpose screwScreen Pack: 40/60/40 or 40/80/40 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BK30GY6531 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Escorene™ Ultra MV 02514 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Paraclean® 31L35 | INSA | NBR | Paraclean® |
| RONFALIN® ABS 1336 CA | A. Schulman Europe | ABS | RONFALIN® |
| UTEC 3041 | Braskem | UHMWPE | UTEC |
