Order Products : sales@su-jiao.com
ESTOPLAST XU 150HFNN02
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST XU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eaygko_ESTOPLASTXU150HFNN02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 6 - Unfilled Automotive: Connector, Housings, Plug & Socket, Handle and Grab Handle Electrical & Electronic: MCB, RCCB, Energy Meter Parts, Rotor Switch and Sensor |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 6.0 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.2 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 15 | % | ASTM D638 |
| Flexural Strength | 95.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 65 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 65.0 | °C | ASTM D648 |
| Peak Melting Temperature | 222 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Strength | 25 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.5 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85 - 90 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 230 - 250 | °C | |
| Middle Temperature | 235 - 250 | °C | |
| Nozzle Temperature | 235 - 255 | °C | |
| Processing (Melt) Temp | 240 - 265 | °C | |
| Mold Temperature | 55 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALENE WPP721 | Southern Polymer, Inc. | HDPE | PRIMALENE |
| RTP 4005 SI | RTP Company | PPA | RTP |
| Sindustris PP HI2203B | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| AVP™ ZLL30CP | SABIC Innovative Plastics | PC | AVP™ |
| GELAST GT9HF | Guang Sung Plastics (GSPL) | SEBS | GELAST |
