Order Products : sales@su-jiao.com
Hypel® PEHD18/.956
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eUmuL3_Hypel-PEHD18-956.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hypel® PEHD18/.956 is a High Density Polyethylene material. It is available in North America. Important attributes of Hypel® PEHD18/.956 are:
Typical application of Hypel® PEHD18/.956: Food Contact Applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.954 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 29.0 | MPa | |
| Break, 23°C | 27.6 | MPa | |
| Tensile Elongation (Yield, 23°C) | 7.7 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1150 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 6.35 mm) | 75.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROLON 2500 G4 X1 | Taro Plast S.p.A. | PC | TAROLON |
| UMG ABS® CE25 | UMG ABS, Ltd. | ABS | UMG ABS® |
| Mytex® AS65KW-LG | Mytex Polymers | TPO | Mytex® |
| Gallonprene® GP210-2004 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Panlite® L-1225LM | TEIJIN LIMITED | PC | Panlite® |
