Order Products : sales@su-jiao.com
NuSil MED-6033
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eUkNHH_NuSil-MED-6033.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: 1.41 R.I., OPTICALLY CLEAR, POURABLE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.410 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.03 | g/cm³ | |
| Viscosity | |||
| -- 1 | 50 | Pa·s | |
| -- 2 | 75 | Pa·s | |
| Curing Time (150°C) | 0.50 | hr | |
| Pot Life (25°C) | > 1400 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 50 | ||
| Tensile Strength | 5.17 | MPa | |
| Tensile Elongation at Break | 310 | % | |
| Tear Strength | 14.0 | kN/m |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD 301 EM | RTP Company | PC | RTP |
| SWANCOR Epoxy 980 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| ULTEM™ PW2400 resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| Amilan® CM3516G33 | Toray Resin Company | Nylon Copolymer | Amilan® |
| Celanex® 5205HG | Celanese Corporation | PBT | Celanex® |
