Order Products : sales@su-jiao.com
RTP 1501-63D
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eSgi3r_RTP-1501-63D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.60 to 0.80 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 960 | MPa | ASTM D638 |
| Tensile Strength | 38.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 18 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 830 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 31.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 350 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 910 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 to 232 | °C | |
| Middle Temperature | 193 to 232 | °C | |
| Front Temperature | 193 to 232 | °C | |
| Mold Temperature | 21.0 to 49.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec LD20-002 | Genesis Polymers | LDPE | SureSpec |
| Fainplast PVC MPH 62/T | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| GPP™ 1001V0F | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| Kumho ASA XC180 | Korea Kumho Petrochemical Co., Ltd. | ASA | Kumho ASA |
| LNP™ THERMOCOMP™ YF005 compound | SABIC Innovative Plastics | TPEE | LNP™ THERMOCOMP™ |
