Order Products : sales@su-jiao.com
ICORENE® 5775
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | A. Schulman Europe |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eQsW1w_ICORENE5775.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 5775 is a high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in kayaks and boat applications. It has very high stifness and scratch resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Flexural Modulus | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 180 | J/cm | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 128 | °C | ASTM D2117 |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC P8190 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| TARODUR 100 X0 | Taro Plast S.p.A. | ABS | TARODUR |
| THERMOLAST® K TC6HAA (Series: AD/POM) | KRAIBURG TPE | TPE | THERMOLAST® K |
| BESTNYL SI00VI01BN-1 | Triesa Plastics | Nylon 6 | BESTNYL |
| Kuraray Poval® PVA 205MB | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
