Order Products : sales@su-jiao.com
PRIMALLOY® B1910
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eO84qb_PRIMALLOY-B1910.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® B1910 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® B1910: Flame Rated. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 24 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 1.0 | % | |
| Flow : 2.00 mm | 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 42 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 32.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 860 | % | ISO 527-2 |
| Flexural Modulus | 120 | MPa | ISO 178 |
| Flexural Stress | 6.50 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 120 | kN/m | ISO 34-1 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-1200/20 NAT | Techmer Engineered Solutions | ABS | TES |
| APEX® 95-A0121B-69 | Teknor Apex Company | PVC, Flexible | APEX® |
| AXELERON™ CC B-3487 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Eltex® A5006FN1285 | INEOS Olefins & Polymers Europe | HDPE Copolymer | Eltex® |
| ALCOM® PA66 910/1 NU SV1057-03MCF | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
