Order Products : sales@su-jiao.com
RTP 299 X 68919 A
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eKLSsI_RTP-299-X-68919-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.10 - 0.20 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.80 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 14500 | MPa | ASTM D638 |
| Tensile Strength | 220 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 11700 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 331 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 270 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1200 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 232 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 249 - 285 | °C | |
| Middle Temperature | 249 - 285 | °C | |
| Front Temperature | 249 - 285 | °C | |
| Mold Temperature | 66.0 - 124 | °C | |
| Injection Pressure | 34.0 - 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MX5200-5006 RS NATURAL | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Ad-Tech Epoxy EC-412 Slow | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| DIGITALWAX® DS 2000 | DWS Systems | Unspecified | DIGITALWAX® |
| Sylvin 8362-75 Brown 7437 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Rotuba CAP CP808 (18% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
