Order Products : sales@su-jiao.com
SureSpec HS-120
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eHgCdc_SureSpec-HS-120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HS-120 is a certified prime grade developed for injection molding applications requiring good strength coupled with good flexibility. HS-120 offers excellent uniformity and consistency of melt viscosity, easy-flow processability and very good Impact resistance of molded articles. HS-120 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2000 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 15.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 50 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 2050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 73.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 96.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® GF8001 | Covestro - Polycarbonates | PC | Makrolon® |
| SUSTAPEEK MG green | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| THERMOLAST® K TC5PCN (Series: AD/PA/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Eltex® A4040 | INEOS Olefins & Polymers Europe | MDPE | Eltex® |
| Sylvin 7833-70C Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
