Order Products : sales@su-jiao.com
POLYFLON™ M-15HS
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | POLYFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eGRQ83_POLYFLON-M-15HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Daikin-Polyflon M-15HS is a polytetrafluoroethylene virgin granular fine cut resin. This general purpose molding powder has been specifically designed for use as a feedstock for filled compound production. M-15HS is particularly well suited for compounds requiring a higher shrinkage than attainable with M-15X or a typical fine cut molding resin. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.15 | g/cm³ | ASTM D792 |
| Apparent Density | 0.28 | g/cm³ | ASTM D1895 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Additional Information |
|---|
| All of the above properties were tested in accordance with ASTM D4894Shrinkage, DAIKIN qac206fp: 6.0-8.0% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Primefin V500/30GC | Lucent Polymers, Inc. | PP Homopolymer | Primefin |
| Fireguard® 910L16-C13-NL | Teknor Apex Company | PVC, Flexible | Fireguard® |
| Elastamax™ XL-2055 | PolyOne Corporation | TPO (POE) | Elastamax™ |
| Geon™ Vinyl Rigid Extrusion 87727 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| EPAMOULD 295A83W | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
