Order Products : sales@su-jiao.com

THERMOLAST® M TM9HET (Series: MC/HE)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® M
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	eBKD6T_THERMOLAST-M-TM9HET-Series-MC-HE-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

he MC/HE Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by combining excellent elasticity with high hardness. The compounds are produced exclusively by a special medical unit and available in translucent colors.

Typical applications

Drip chamber

Luer lock

Squeeze bottles

Material advantages

Adhesion to PP

DMF listed

Free of animal basedingredients

High elasticity

High stiffness

KRAIBURG TPE Medical service package (description below)

Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)

Tested according to ISO 10993-5

General Information
Features	Autoclave Sterilizable Ethylene Oxide Sterilizable Good Adhesion High Elasticity High Hardness High Stiffness No Animal Derived Components Radiation Sterilizable
Uses	Bottles Medical/Healthcare Applications
Agency Ratings	DMF 25601 ISO 10993 Part 5
Appearance	Clear/Transparent
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	39		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	18.5	MPa	ISO 37
Tensile Elongation ²(Break)	750	%	ISO 37
Tear Strength ³	74	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	62	%
70°C, 24 hr	83	%
100°C, 24 hr	85	%

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	180	°C
Middle Temperature	200	°C
Front Temperature	220	°C
Mold Temperature	25.0 to 40.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Braskem PE TX7003	Braskem	LDPE	Braskem PE
Hanwha Total PE 610A	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	LDPE	Hanwha Total PE
Huafon T25H	Huafon Group Co., Ltd.	Nylon 66	Huafon
LNP™ THERMOCOMP™ ZF0049 compound	SABIC Innovative Plastics	PPE+PS	LNP™ THERMOCOMP™
Plexiglas® V052i-58208RB	Altuglas International of Arkema Inc.	Acrylic (PMMA)	Plexiglas®