Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 812
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e5ihzE_ASI-POLYETHYLENE-CP-812.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 812 is a linear medium-density polyethylene resin with excellent molding characteristics and good low temperature impact. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.935 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus | 552 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 140 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 | |
| Gardner Impact (-40°C) | 65.1 | J |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201 TFE 20 SI | RTP Company | Nylon 66 | RTP |
| Torayca® A630T-10V | Toray Resin Company | PPS | Torayca® |
| Nipol® SBR 1502 | Zeon Corporation | SBR, Emulsion | Nipol® SBR |
| Gravi-Tech™ GRV-NP-110-W-NAT | PolyOne Corporation | Nylon 12 | Gravi-Tech™ |
| Evoprene™ G 616 | Mexichem Specialty Compounds Inc. | TPE | Evoprene™ G |
