Order Products : sales@su-jiao.com
Formolene® 5100J
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e4ousp_Formolene-5100J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Homopolymer for Compounding and Extrusion Applications Formolene® 5100J is a high molecular weight, polypropylene homopolymer designed for compounding and extrusion applications. It has applications in blow molding and thermoforming of large components and profile extrusion blow molding. It contains a unique combination of stabilizers and additives, which provides excellent processability and good end use performance. It does not contain slip or anti-block. Formolene® 5100J meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 33.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 48 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ E165D | Miracll Chemicals Co., Ltd. | TPU-Polyester | Mirathane™ |
| Tecolen® HP30 NL XC30 | Eurotec Engineering Plastics | PP Homopolymer | Tecolen® |
| DOWLEX™ 2083G | The Dow Chemical Company | LLDPE | DOWLEX™ |
| LEXAN™ HP9NR resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Sylvin 8950-90 Grey 9415 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
