Order Products : sales@su-jiao.com
Generic PP Impact Copolymer - Mineral
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e4D0k0_Generic-PP-Impact-Copolymer---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Impact Copolymer - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.947 to 1.15 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.8 to 27 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 14.9 to 18.3 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 74 to 110 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 1190 to 1820 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 4.5 to 46 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 72.1 to 100 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 44.8 to 64.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 39.8 to 125 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® AGV 40 Black | Radici Plastics | Nylon 66 | Radilon® |
| Tenac™ 2010 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| Wellamid® GS40-60 42LH-N | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| 4MID® 9A22115 | 4Plas | Nylon 66 | 4MID® |
| Plaslube® PA6/10 BK | Techmer Engineered Solutions | Nylon 610 | Plaslube® |
