Order Products : sales@su-jiao.com
Trithene® SX 7012
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Petroquimica Triunfo |
| Trademark: | Trithene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e2aIcZ_Trithene-SX-7012.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The Trithene® SX 7012 is a low density polyethylene (LDPE) which presents good flexibility. It is used in blow molding process for production of small and flexible flasks for medical and pharmaceutical goods. Its easy processability also allows high molding productivity, thickness uniformity, and excellent surface appearance. Trithene® SX 7012 is chemically inert and it presents high stability in the presence of chemical and solvent agents. There are no additives in the product formulation, and during its production are adopted procedures to guarantee high purity level. This product is identified as PE 113 according to ASTM D-4976-04a standard specification. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 - 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 - 1.4 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, Molded | 93 | ASTM D2240 | |
| Shore D, Molded | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 5% Secant (Compression Molded) | 135 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 10.0 | MPa | ASTM D638 |
| Fracture, molding | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 490 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Melting Temperature | 111 | °C |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| CAS Number | 9002-88-4 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 165 - 175 | °C | |
| Mold Temperature | 15.0 | °C |
| Injection instructions |
|---|
| Processing parameters are for blow molding. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® 24FS040 | Reliance Industries Limited | LDPE | RELENE® |
| Staramide RB008 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| ARNYL PA66 30% FV INDUSTRIALE NERO | Daloga srl | Nylon 66 | ARNYL |
| Kingfa JH830T | Kingfa | PC Alloy | Kingfa |
| Lucalen A 2910 M | LyondellBasell Industries | EAA | Lucalen |
