Order Products : sales@su-jiao.com

Quadrant EPP Ertalyte® PET-P

Category:	PET , Polyethylene Terephthalate
Manufacturer:	Quadrant Engineering Plastic Products
Trademark:	Quadrant EPP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	e2PX20_Quadrant-EPP-Ertalyte-PET-P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Quadrant EPP Ertalyte® PET-P is a Polyethylene Terephthalate (PET) product. It is available in Europe or North America. Applications of Quadrant EPP Ertalyte® PET-P include engineering/industrial parts, food contact applications, housings and sealing applications.

Characteristics include:

Flame Rated

Wear Resistant

Chemical Resistant

Corrosion Resistant

Creep Resistant

General Information
Features	Crystalline Good Abrasion Resistance Good Chemical Resistance Good Corrosion Resistance Good Creep Resistance Good Dimensional Stability Good Electrical Properties Good Wear Resistance Good Weather Resistance High Rigidity High Strength Low Moisture Absorption Radiation (Gamma) Resistant
Uses	Bearings Bushings Gears Housings Pump Parts Seals Thrust Washer Valves/Valve Parts
Agency Ratings	FDA 21 CFR 177.1630
Appearance	Black White
Forms	Rod Sheet

Physical	Nominal Value	Unit	Test Method
Density	1.39	g/cm³	ISO 1183
Water Absorption			ISO 62
23°C, 24 hr	0.70	%
Saturation, 23°C	0.50	%
Equilibrium, 23°C, 50% RH	0.25	%
Water Absorption			ISO 62
23°C, 3.00 mm ¹	6.0	mg
23°C, 3.00 mm ²	0.16	%
23°C, 3.00 mm ³	13.0	mg

Thermal	Nominal Value	Unit	Test Method
Service Temperature - Minimum	-20	°C

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale, 10.0 mm)	96		ISO 2039-2
Ball Indentation Hardness (10.0 mm)	170	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ⁴	3700	MPa	ISO 527-2/1
Tensile Stress ⁵(Yield)	90.0	MPa	ISO 527-2/20
Tensile Strain ⁶(Break)	15	%	ISO 527-2/20
Tensile Creep Modulus (1000 hr)	26.0	MPa	ISO 899-1
Compressive Stress			ISO 604/1
5% Strain	103	MPa
2% Strain	51.0	MPa
1% Strain	26.0	MPa

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	2.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength	> 50	kJ/m²	ISO 179/1eU
Notched Izod Impact Strength ⁷	2.0	kJ/m²	ISO 180/2A

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ⁸(1.8 MPa, Unannealed)	75.0	°C	ISO 75-2/A
Continuous Use Temperature
-- ⁹	100	°C
-- ¹⁰	115	°C
-- ¹¹	160	°C
Melting Temperature (DSC)	255	°C
CLTE - Flow
23 to 60°C	6.0E-5	cm/cm/°C
23 to 100°C	8.0E-5	cm/cm/°C
Thermal Conductivity (23°C)	0.29	W/m/K

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity ¹²	> 1.0E+14	ohms	IEC 60093
Volume Resistivity ¹³	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength ¹⁴(1.00 mm)	22	kV/mm	IEC 60243-1
Relative Permittivity ¹⁵			IEC 60250
100 Hz	3.40
1 MHz	3.20
Dissipation Factor ¹⁶			IEC 60250
100 Hz	1.0E-3
1 MHz	0.014
Comparative Tracking Index ¹⁷	600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
3.00 mm	HB
6.00 mm	HB
Oxygen Index	25	%	ISO 4589-2

Note Message
1 .	Weight, 24 hrs
2 .	96 hrs
3 .	Weight, 96 hrs
4 .	Conditioned at 23°C/50%RH
5 .	Conditioned at 23°C/50%RH
6 .	Conditioned at 23°C/ 50%RH
7 .	Conditioned at 23°C/50%RH
8 .	Dry
9 .	20000 hrs
10 .	5000 hrs
11 .	Short periods
12 .	Dry
13 .	Conditioned at 23°C/50%RH
14 .	Conditioned at 23°C/50%RH
15 .	Dry
16 .	Dry
17 .	Dry

Resin Grade	Manufacturer	Category	Trademark
Arak LLDPE HD5050EA	Shazand (Arak) Petrochemical Corporation	HDPE	Arak LLDPE
Cheng Yu FV3035	Cheng Yu Plastic Company Limited	Acetal (POM) Homopolymer	Cheng Yu
Hifax TYC 007P E C13097	LyondellBasell Industries	PP Copolymer	Hifax
Sylvin 8205-75UV Blue 8473	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
LNP™ LUBRICOMP™ QFP36 compound	SABIC Innovative Plastics	Nylon 610	LNP™ LUBRICOMP™