Order Products : sales@su-jiao.com
Skyrol® SP82
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | SKC Inc. |
| Trademark: | Skyrol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | duqhUO_Skyrol-SP82.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Skyrol® SP82 is a two side pretreated polyester film for improved solvent based ink adhesion. SP82 has been widely accepted for use in flexible packaging applications, especially for those requiring high quality printing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.40 | g/cm³ | ASTM D1505 |
| Molding Shrinkage | Internal Method | ||
| Flow : 150°C, 30 min, 0.0120 mm | 1.6 | % | |
| Flow : 150°C, 30 min, 0.0230 mm | 1.6 | % | |
| Across Flow : 150°C, 30 min, 0.0120 mm | 1.1 | % | |
| Across Flow : 150°C, 30 min, 0.0230 mm | 0.70 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic 2 | 0.30 | ||
| vs. Itself - Dynamic 3 | 0.30 | ||
| vs. Itself - Static 4 | 0.40 | ||
| vs. Itself - Static 5 | 0.40 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 12 µm | 283 | MPa | |
| MD : Yield, 23 µm | 262 | MPa | |
| TD : Yield, 12 µm | 255 | MPa | |
| TD : Yield, 23 µm | 255 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 12 µm | 120 | % | |
| MD : Break, 23 µm | 130 | % | |
| TD : Break, 12 µm | 120 | % | |
| TD : Break, 23 µm | 120 | % |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss | ASTM D523 | ||
| 12.0 µm | 163 | ||
| 23.0 µm | 159 | ||
| Transmittance | ASTM D1003 | ||
| 12.0 µm | 91.0 | % | |
| 23.0 µm | 90.0 | % | |
| Haze | ASTM D1003 | ||
| 12.0 µm | 2.6 | % | |
| 23.0 µm | 3.4 | % |
| Note Message | |
|---|---|
| 1 . | 23 µm |
| 2 . | 23 µm |
| 3 . | 12 µm |
| 4 . | 12 µm |
| 5 . | 23 µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-300A75 | SHIN-A T&C | Epoxy | SHIN-A |
| Ultramid® B3M8 (8260) | BASF Corporation | Nylon 6 | Ultramid® |
| ALTECH® PP-H A 4920/107 MR20 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Exxtral™ Performance Polyolefin CNK010 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| KRATON® D1170 B | Kraton Polymers LLC | SIS | KRATON® |
