Order Products : sales@su-jiao.com
Petrothene® NA270001
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | drVqhB_Petrothene-NA270001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene low density polyethylene (LDPE) polymers can be used in a broad range of applications. LDPE homopolymers can be formulated into a wide range of polymer systems to impart strength, toughness and heat resistance. These materials may contain stabilizers or other additives as required for processing and handling purposes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.31 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 123 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santron IMS1000M | Bhansali Engineering Polymers Limited | SAN | Santron |
| WPP PP PPH3MG3.7 | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| ANYPOL CL-250LL | SH Energy & Chemical | PS (EPS) | ANYPOL |
| EOS PA 2200 Top Quality 1.0 | EOS GmbH | Nylon 12 | EOS |
| Kynar® 3312C | Arkema | PVDF | Kynar® |
