Order Products : sales@su-jiao.com
Santron IMS1000
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | Bhansali Engineering Polymers Limited |
| Trademark: | Santron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dpwGnM_Santron-IMS1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Santron IMS1000 is a Styrene Acrylonitrile (SAN) product. It is available in Asia Pacific. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 35 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 122 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 3.20 mm, Injection Molded 1 | 63.7 | MPa | |
| Yield, 3.20 mm, Injection Molded 2 | 68.6 | MPa | |
| Flexural Strength 3(6.40 mm, Injection Molded) | 88.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(1.8 MPa, Annealed, 6.40 mm, Injection Molded) | 97.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Type I, 5.0 mm/min |
| 2 . | Type I, 50 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Annealed at 85°C for 2 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unipren® Elastomers B3 PRTA010 40A UP312 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Novamid® 2020J | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| AKROMID® A3 GF 40 natural (1258) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| KMI PP KM083-HJ | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
| Sylvin 5150-80 Brown 7309 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
