Order Products : sales@su-jiao.com
Epoxies, Ect. 20-3300
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dptHWg_Epoxies-Ect-20-3300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-3300 is a two part epoxy system formulated to meet the most critical electronic encapsulating requirements. This system has low shrinkage, high tensile and compressive strength. 20-3300 is ideal for high heat and thermal shock exposure. It has excellent adhesion to most substrates and forms a hermetic like seal to protect encapsulated parts. Great choice for high voltage applications. 20-3300 has a convenient 1:1 mix ratio with an extended pot life. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 3.8E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.58 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 12000 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -70.0 to 260 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Mix Ratio by Weight (PBW) | |||
| Part A | 1.0 | ||
| Part B | 1.0 | ||
| Density (25°C) | 1.40 | g/cm³ | |
| Curing Time (145°C) | 2.0 | hr | |
| Pot Life 1(25°C) | 2700 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 87 | ||
| Tensile Strength | 51.7 | MPa | |
| Compression Strength | 138 | MPa | |
| Electric Strength | 18 | kV/mm | |
| Relative Permittivity (60 Hz) | 4.00 | ||
| Volume Resistivity | 3.3E+15 | ohms·cm | |
| Dissipation Factor (60 Hz) | 0.010 |
| Note Message | |
|---|---|
| 1 . | 100 gram mass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ CRS5001 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Complet® LGF40-PP | PlastiComp, Inc. | PP Homopolymer | Complet® |
| Kingfa JH710 G30 | Kingfa | PC Alloy | Kingfa |
| Lustran® SAN Sparkle | Styrolution | SAN | Lustran® SAN |
| 3M™ Dyneon™ PTFE Compound TF 3406 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
