Order Products : sales@su-jiao.com
Trexprene® A50NI-HF
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | Trexprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dnPW5a_Trexprene-A50NI-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Product Description: TREXPRENE ® A55NI-HF is a natural PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). The material has been formulated specifically for the sheet market and can be used as a master batch in TPO formulations or in its virgin state. The material contains no UV stabilizers as the intention is that this will be added by the processor with the desired color concentrate. The material is intended for applications where excellent gas-fade resistance or non-pinking is required. This material can be processed using Extrusion or Calendaring processes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 to 0.940 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 45 to 51 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 1.10 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 3.20 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 430 | % | ISO 37 |
| Tear Strength - Across Flow 4 | 17 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | |||
| -- | < -56.0 | °C | ASTM D746 |
| Type B | < -56.0 | °C | ISO 812 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging - Photometric | 80 | % | SAE J1756 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance 5(40°C) | 0 Rating | ISO 1431-1 |
| Note Message | |
|---|---|
| 1 . | Type 1, 500 mm/min |
| 2 . | Type 1, 500 mm/min |
| 3 . | Type 1, 500 mm/min |
| 4 . | Method Ba, Angle (Unnicked), 500 mm/min |
| 5 . | 100 pphm, Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Visituf™ 3028 | Technical Polymers, LLC | PC | Visituf™ |
| Nipol® NBR DN302 | Zeon Corporation | NBR | Nipol® NBR |
| DISTRUMID EC6 GF20 | Distrupol | Nylon 6 | DISTRUMID |
| FRIANYL® A3 GF20 V2XI | Nilit Plastics | Nylon 66 | FRIANYL® |
| Wanthane® WHT-1185F | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
