Order Products : sales@su-jiao.com
Hostacom TRC 160Y NATURAL
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | di8rTo_HostacomTRC160YNATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hostacom TRC 160Y NATURAL is a 15% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness/impact balance, low odor and excellent flowability properties with good dimensional stability. It is typically used for molding paintable automotive interior trim parts. For regulatory compliance information, see Hostacom TRC 160Y NATURAL Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile modulus- 1% Secant | 1750 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 18.0 | MPa | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 4.5 | kJ/m² | ISO 179/1eA |
| 23°C | 45 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 90.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.0 | °C | ISO 75-2/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULADUR® A GF 30 HR | A. Schulman Europe | PBT | SCHULADUR® |
| THORNEL® VMX-24 | Cytec Industries Inc. | Carbon/Epoxy | THORNEL® |
| NEFTEKHIM PS 585V | Nizhnekamskneftekhim Inc. | PS (GPPS) | NEFTEKHIM PS |
| Iupital® F20-61 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
| Plexiglas® V045i | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
