Order Products : sales@su-jiao.com
ADPOLY EM-700
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | ADPOLY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dc9Yx3_ADPOLY-EM-700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EM-700 is LLDPE based adhesive resin containing anhydride. This grade shows strong adhesion to PE, Aluminum and it has polyolefin-like properties. In addition, its processability is excellent. EM-700 is mainly intended for use as a adhesive resin in steel pipe coating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 to 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 579 | MPa | ASTM D790 |
| Flexural Strength | 15.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 103 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion Strength | > 7.00 | kgf/2 cm | ASTM D903 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 P-45 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| NEXT SIGNATURE CAP MG-100 | NEXT Specialty Resins, Inc. | CAP | NEXT SIGNATURE |
| Hipolyene GM BP 11 | Zylog Plastalloys | TPO (POE) | Hipolyene |
| PLUSTEK PA804 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| EPALINE 393A34 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPALINE |
