Order Products : sales@su-jiao.com
Dryflex® SE 90A001N U
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dXiLiY_DryflexSE90A001NU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex SE 90A001N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 90 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material) Colour: Translucent, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic and vegetable oils) Recycling: 100% Recyclable Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 - 2.0 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 90 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow | ISO 37 | ||
| 100% strain | 4.90 | MPa | ISO 37 |
| 300% strain | 6.00 | MPa | ISO 37 |
| Tensile Stress - Across Flow (Yield) | 15.2 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 750 | % | ISO 37 |
| Tear Strength - Across Flow 2 | 51 | kN/m | ISO 34-1 |
| Compression Set 3 | ISO 815 | ||
| 23°C, 72 hr | 41 | % | ISO 815 |
| 70°C, 22 hr | 61 | % | ISO 815 |
| 100°C, 22 hr | 76 | % | ISO 815 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 15 - 50 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on shape of the detail and placement of the gate. |
| 2 . | C method: crescent sample |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Kingfa FRHIPS-8002U | Kingfa | PS (HIPS) | Kingfa |
| LARIPUR® LPR 5760 | COIM S.p.A. | TPU-Polyether | LARIPUR® |
| Hyflon® PFA P220 | Solvay Specialty Polymers | PFA | Hyflon® PFA |
| LNP™ THERMOCOMP™ DF008ERH compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
| OLEFISTA™ QM4301E/QCM292 | Mitsubishi Chemical Performance Polymers, Inc. | Elastomer, Specialty | OLEFISTA™ |
