Order Products : sales@su-jiao.com
Braskem PE LDI2020
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem IDESA |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dWhhuE_BraskemPELDI2020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The resin LDI2020 is a low density polyethylene produced at high pressure condition in tubular reactor, designed for injection molding. Products molded with this resin have a good balance between stiffness, smoothness, dimensional stability and processability. Applications: Lids and caps, household items. Injection molded parts of large flat area. Process: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 12.0 | MPa | ASTM D638 |
| Fracture | 9.00 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant | 220 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResinDirect GPPS13 | ResinDirect | PS (GPPS) | ResinDirect |
| Telcar® GSE5573 | Teknor Apex Asia Pacific PTE. LTD. | TPE | Telcar® |
| Generic TPO - Mineral | Generic | TPO | Generic |
| Karina YELLOW PVC COMPOUND 701D02/ 23-SD | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Dow Corning® C6-165 | Dow Corning Corporation | Silicone | Dow Corning® |
