Order Products : sales@su-jiao.com
Jamplast JPPLA
| Category: | PLA , Polylactic Acid |
| Manufacturer: | Jamplast, Inc. |
| Trademark: | Jamplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dWgMWA_Jamplast-JPPLA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| JPPLA is a thermoplastic resin intended for higher heat applications. Derived primarily from annually renewable resources, it is specifically designed for extrusion/thermoforming applications. JPPLA is opaque and processes easily on conventional extrusion and thermoforming, and injection equipment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 62.1 | MPa | |
| Break | 55.8 | MPa | |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.025 | % | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 193 | °C | |
| Die Temperature | 199 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 A MS | RTP Company | Nylon 6 | RTP |
| PRL TPSF-FRG30 | Polymer Resources Ltd. | PBT | PRL |
| DOW™ HDPE 35060A | The Dow Chemical Company | HDPE | DOW™ HDPE |
| KOPA® KN333G33 | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| SUMIMAC® ECR-2222K/ECH-222G | SBHPP | Epoxy | SUMIMAC® |
