Order Products : sales@su-jiao.com
Elastamax™ XL-2175
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dTpxz2_Elastamax-XL-2175.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance of physical properties and processability, and are an economical alternative to traditional thermoset rubber and more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 86 | ||
| Shore A, 15 sec | 81 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412A | ||
| 100% Strain | 4.41 | MPa | |
| 300% Strain | 5.31 | MPa | |
| Tensile Strength 2(Break) | 7.72 | MPa | ASTM D412A |
| Tensile Elongation 3(Break) | 700 | % | ASTM D412A |
| Tear Strength 4 | 49.0 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 43 | % | ASTM D395B |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | Die C, 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riteflex® 830 | Celanese Corporation | TPC-ET | Riteflex® |
| THERMOLAST® A TA5AOZ (Series: UV/AD1) | KRAIBURG TPE | TPE | THERMOLAST® A |
| Unichem 3478-NAT000 | Colorite Polymers | PVC, Rigid | Unichem |
| Delta ABR-1G70/1 | Delta Polymers | ABS | Delta |
| Kotex KG-20MRA | Kotec Corporation | PC | Kotex |
