Order Products : sales@su-jiao.com
WEVO-CHEMIE Polyurethanes PU 552 FL/300
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | WEVO-CHEMIE GmbH |
| Trademark: | WEVO-CHEMIE Polyurethanes |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dRDrXR_WEVO-CHEMIE-Polyurethanes-PU-552-FL-300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WEVO-CHEMIE Polyurethanes PU 552 FL/300 is a Polyurethane material. It is available in Europe or North America for casting. Primary attribute of WEVO-CHEMIE Polyurethanes PU 552 FL/300: Flame Rated. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption 1(Saturation, 23°C) | 0.40 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 15.0 | °C | TMA |
| Thermal Conductivity | 0.61 | W/m/K | ISO 22007-2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 20 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (22°C) | 2.0 to 45 | min | |
| Thermoset Mix Viscosity 2(22°C) | 1000 to 1300 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Operating Temperature | -40 to 130 | °C |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | |||
| 22°C 3 | 1.20 to 1.24 | g/cm³ | |
| 22°C 4 | 1.56 to 1.60 | g/cm³ |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 70 | ISO 868 | |
| Tensile Strength | 6.00 | MPa | ISO 527 |
| Tensile Elongation at Break | 62 | % | ISO 527 |
| Electric Strength | 29 | kV/mm | IEC 60243 |
| Relative Permittivity (50 Hz, 23°C) | 5.60 | IEC 60250 | |
| Volume Resistivity | 5.0E+13 | ohms·cm | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 30 Days |
| 2 . | Rotational viscometer |
| 3 . | Hardener |
| 4 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SkinFlex III Brushable | BJB Enterprises, Inc. | TSU | SkinFlex III |
| THERMOLAST® K TC5PCN (Series: AD/PA/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| 3M™ Dyneon™ Fluoroplastic THVP 2030GZ | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroplastic |
| ESTAPROP KUR 0640 TG | Cossa Polimeri S.r.l. | PP Copolymer | ESTAPROP |
| KOCETAL® CB301 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
