Order Products : sales@su-jiao.com
DENILUB Y 15G 0Mo
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dR4Nkd_DENILUB-Y-15G-0Mo.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 66 15% glass fiber reinforced with molybdenum disulfide. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.80 | % | |
| Across Flow | 1.2 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6500 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 110 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.32 | ||
| Static | 0.36 | ||
| Wear Factor 1 | 45.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 4.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 25 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 235 | °C | ASTM D648A |
| Vicat Softening Temperature | 250 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B32^E Q30 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| TAIRILOY AC2300 | Formosa Plastics Corporation | PC+ABS | TAIRILOY |
| Electrafil® PA6/6 GF10 BK | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| EPO-TEK® H75 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| MAXAMID™ RCU6G33HSL-BK09 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
