Order Products : sales@su-jiao.com
Jam 524H1FX
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dQqvbV_Jam524H1FX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
524HIFX is a HDPE copolymer suitable for production of high stiffness blown film. This grade shown outstanding bubble stability at high film line speed and at low downgauging. It is well suited for monolayer film, blending and coextrusion. Features
Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.15 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 15 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 15 µm, blown film | 900 | MPa | ASTM D882 |
| 2% secant, TD : 15 µm, blown film | 800 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 15 µm, blown film | 50.0 | MPa | ASTM D882 |
| TD : Yield, 15 µm, blown film | 30.0 | MPa | ASTM D882 |
| MD : Broken, 15 µm, blown film | 52.0 | MPa | ASTM D882 |
| TD : Broken, 15 µm, blown film | 45.0 | MPa | ASTM D882 |
| Dart Drop Impact (15 µm, Blown Film) | 70 | g | ASTM D1709A |
| Tear Propagation Resistance | ASTM D1004 | ||
| MD (Blown film) : 15.0 µm | 200 | g | ASTM D1004 |
| TD (Blown film) : 15.0 µm | 400 | g | ASTM D1004 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Syncure™ S1054A Natural | PolyOne Corporation | XLPE | Syncure™ |
| Baytec® SPR-092A Black | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| Bergamid™ B700 G30 H BL244 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| INSULCAST® 136/INSULCURE 11B | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| LNP™ THERMOCOMP™ UF00AAS compound | SABIC Innovative Plastics Europe | PPA | LNP™ THERMOCOMP™ |
