Order Products : sales@su-jiao.com
Vyncolit® G83
| Category: | Phenolic , Phenolic |
| Manufacturer: | Vyncolit N.V. |
| Trademark: | Vyncolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dPzFAz_Vyncolit-G83.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vyncolit G83 is a phenolic (Phenolic) material, and its filler is fiber filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. The main features of Vyncolit G83 are:
the typical application field of Vyncolit G83 is: housing |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.41 | g/cm³ | ISO 1183 |
| Apparent Density | 0.50 | g/cm³ | ISO 60 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.50 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 30.0 | MPa | ISO 527-2 |
| Flexural Modulus | 8250 | MPa | ISO 178 |
| Flexural Stress | 60.0 | MPa | ISO 178 |
| Compressive Stress | 150 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.5 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 5.5 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 150 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 15 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 125 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (4.00 mm) | V-1 | UL 94 |
| Additional Information |
|---|
| Apparent Density, ISO 60: 0.45 to 0.55 g/cm³Pourability: excellentMold Shrinkage, ISO 2577: 0.60 to 0.80 %Post Shrinkage, ISO 2577: 0.40 to 0.60 %Flexural Modulus, ISO 178: 7.5 to 9.0 GPaInsulation resistance dry, IEC 167: 1 G OhmInsulation resistance wet after 24 hours in water, IEC 167: 0.5 G Ohm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 100 AR 15 TFE 15 | RTP Company | PP, Unspecified | RTP |
| SCHULAMID® 612 IC 4005 W | A. Schulman Europe | Nylon 612 | SCHULAMID® |
| SLOVALEN® PH 78 FRT 5 | Plastcom | PP, Unspecified | SLOVALEN® |
| NYLEM® 66 GXR 25 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| Fortron® 1115E7 | Celanese Corporation | PPS | Fortron® |
