Order Products : sales@su-jiao.com
Thermec™ 4301R45H
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Technical Polymers, LLC |
| Trademark: | Thermec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dNVs5R_Thermec-4301R45H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermec™4301R45H is a polyxylene amide (PPA) material, which contains a 45% glass fiber reinforced material. This product is available in North America and is processed by injection molding. Thermec™The main features of 4301R45H are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.58 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 241 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.3 | % | ASTM D638 |
| Flexural Modulus (23°C) | 13400 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 352 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 282 | °C | ASTM D648 |
| Melting Temperature | 296 | °C | DSC |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Tensile Elongation, ASTM D638: 2 to 2.5%Volum Resistivity, ASTM D257: >1e15 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 98.9 - 107 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 321 - 332 | °C | |
| Mold Temperature | 135 - 163 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.103 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² | |
| Cushion | 3.18 - 12.7 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.0:1.0 to 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CALP 1401G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Lucobit 1221 | Lucobit AG | PE Copolymer | Lucobit |
| Lushan VB150A | Guangzhou Lushan New Materials Co., Ltd | PE, Unspecified | Lushan |
| Sylvin 6168-80 Grey 9439 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 4200-85 Brown 7440 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
