Order Products : sales@su-jiao.com

Precision Polymer S60H

Category:	Silicone , Silicone
Manufacturer:	Precision Polymer Engineering Ltd.
Trademark:	Precision Polymer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dKlPZQ_Precision-Polymer-S60H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
White Silicone Rubber, 56-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. ASTM & ISO designation = VMQ. Excellent heat resistance and low temperature flexibility. Used primarily for dry heat static seals. Low physical strength and poor abrasion resistance prevents dynamic sealing.

Message

White Silicone Rubber, 56-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. ASTM & ISO designation = VMQ.

Excellent heat resistance and low temperature flexibility. Used primarily for dry heat static seals. Low physical strength and poor abrasion resistance prevents dynamic sealing.

General Information
Features	Flexibility at low temperatures Heat resistance, high
Uses	Seals
Agency Ratings	FDA 21 CFR 177.2600
Appearance	White

Hardness	Nominal Value		Test Method
IRHD Hardness	60		ASTM D1415, ISO 48

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	7.40	MPa	ASTM D412, ISO 37
Tensile Elongation (Break)	320	%	ASTM D412, ISO 37
Compression Set
175°C, 24 hr	40	%	ASTM D395B
175°C, 24 hr ¹	40	%	ISO 815

Thermal	Nominal Value	Unit
Maximum Operating Temperature	250	°C

Additional Information	Nominal Value	Unit
Low Temperature Resistance - Non-brittle after 3 mins	-60	°C
Minimum Operating Temperature: -60°C (-76°F)

Note Message
1 .	Type B

Resin Grade	Manufacturer	Category	Trademark
Next Nylon 66 Prime Series PG25-01NC	Next Polymers Ltd.	Nylon 66	Next Nylon 66 Prime Series
Nordbak Backing Material	Loctite®	Epoxy	Nordbak
Halene H P4600L	Haldia Petrochemicals Ltd.	HDPE	Halene H
Plexiglas® 8H	Evonik Industries AG	Acrylic (PMMA)	Plexiglas®
Sylvin 916VO Brown 7415	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin