Order Products : sales@su-jiao.com
Sinvicomp SIZ7008A
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dHw2fc_Sinvicomp-SIZ7008A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp" SIZ 7008A is a wire & cable polyvinylchloride compound available in pellet form. SIZ 7008A provides good performance for insulation and jacketing of electrical wires. |
| General Information | |
|---|---|
| Uses |
|
| Wire Types (AS 3147/3191) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 15.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 300 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 115°C, 504 hr 1 | AS 3147/3191 | ||
| Tensile strength change | 10 | % | AS 3147/3191 |
| Change in tensile elongation | 20 | % | AS 3147/3191 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 5.0E+13 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 115±2°C, 5 days 2(115°C) | 1.50 | mg/cm² | AS 3147/3191 |
| Typical temperature profile for processing SINVICOMP compound is from 140°C to 160°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 150°C~160°CCompression zone: 160°C~170°CMixing zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | 115±2°C |
| 2 . | 115±2°C, 5 days |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ E385 | Miracll Chemicals Co., Ltd. | TPU-Polyester | Mirathane™ |
| TRIBOCOMP® PA66 CF30 TS7 | EPIC Polymers | Nylon 66 | TRIBOCOMP® |
| Delta PPC-2C40 | Delta Polymers | PP Copolymer | Delta |
| Formolene® 2510W | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| LEXAN™ CFR9712 resin | SABIC Innovative Plastics | PC | LEXAN™ |
