Order Products : sales@su-jiao.com
ETILINAS MD20BK
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dHrUpG_ETILINAS-MD20BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ETILINAS MD20BK is designed specifically for the manufacture of pipe and pipe fittings for use in potable water, gas and other high performance pressure pipeline systems. ETILINAS MD20BK is based on a special medium density copolymer with exceptionally high resistance to environmental stress cracking and meets the ISO classification PE80 for pipe materials. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.85 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (F0) | 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 19.0 | MPa | ISO 527-2/2 |
| Tensile Strain (Break) | 600 | % | ISO 527-2/2 |
| Flexural Modulus | 750 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 116 | °C | ISO 306/A |
| CLTE - Flow (20 to 60°C) | 1.5E-4 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Density of Compound, ISO 1872/1, Annealed: 949 kg/m³Carbon Black Content, ISO 6964: 2.25%Minimum Required Strength (MRS), ISO TR9080, 97.5% LCL: 8.0 MPaThermal Conductivity, BS 874, 23°C: 0.4 W/m/°CVolume Resistivity, BS 2782:230A: >1e13 ohm-cmOxidation Induction Time, ISO TR10837, 200°C: >40 minOxidation Induction Time, ISO TR10837, 210°C: >20 min |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 - 225 | °C |
| Extrusion instructions |
|---|
| Suggested Screen Pack: 40/80 Mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3480 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Manner Flexible PVC X3387 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Shin-Etsu RTV KE-1833 | Shin-Etsu Silicones of America | Silicone Rubber, RTV-1 | Shin-Etsu RTV |
| Edgetek鈩?AT-20GF/000 BLACK | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
| PLUSTEK PA804 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
