Order Products : sales@su-jiao.com
Elastocon® 2840ST
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dHWfcz_Elastocon2840ST.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 2840ST is a translucent thermoplastic elastomer compound formulated for applications that require super tough rubber-like properties, high resilience, and high tear strength. Elastocon® 2840ST is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2840ST is supplied as ready to use pellets in 50 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.830 | MPa | ASTM D412 |
| Tensile Strength | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 790 | % | ASTM D412 |
| Tear Strength | 25.9 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 193 - 204 | °C | |
| Nozzle Temperature | 199 - 204 | °C | |
| Processing (Melt) Temp | 199 - 204 | °C | |
| Mold Temperature | 38 - 49 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Elastocon® 2840ST thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 171 | °C | |
| Cylinder Zone 3 Temp. | 171 - 177 | °C | |
| Cylinder Zone 4 Temp. | 182 - 188 | °C | |
| Cylinder Zone 5 Temp. | 177 - 182 | °C | |
| Die Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 75 to 125 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WanBlend® WHT-HF9485K2 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | WanBlend® |
| DOW™ HDPE DMDB-7950 NT 7 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Braskem PP F008F | Braskem America Inc. | PP Homopolymer | Braskem PP |
| ANYPOL CL-300LL | SH Energy & Chemical | PS (EPS) | ANYPOL |
| Sylvin 8344-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
