Order Products : sales@su-jiao.com
Delene 3550
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Delene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dGfaWY_Delene3550.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Delene 3550 is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main features of Delene 3550 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 3.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 200 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (2.0 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 90 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 190 - 250 | °C | |
| Injection Pressure | 40.0 - 60.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1499 X 92453 | RTP Company | PESU | RTP |
| Provista™ Copolyester | Eastman Chemical Company | Copolyester | Provista™ |
| CoREZYN® COR31-DA-208 | Interplastic Corporation | Polyester, TS | CoREZYN® |
| HiFill® PA6 IM 409 L MB | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Latamid 66 H2PX-V2 | LATI S.p.A. | Nylon 66 | Latamid |
