Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion L0152
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dG8T1B_Geon-Vinyl-Rigid-Extrusion-L0152.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion L0152 is a rigid PVC product,. It can be processed by extrusion molding of profiles and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The main characteristics are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 16343 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2610 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 43.9 | MPa | ASTM D638 |
| Flexural Modulus | 2810 | MPa | ASTM D790 |
| Flexural Strength | 80.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 23°C, 3.18mm, injection molding | 940 | J/m | ASTM D256A |
| Transverse flow : 23°C, 3.18mm, molded | 600 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 780 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 55.6 | J/cm | ASTM D4226 |
| 23°C 4 | 199 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 68.9 | °C | ASTM D648 |
| CLTE - Flow | 7.2E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 207 HB | RTP Company | Nylon 66 | RTP |
| Styrolution PS 5600/5601 | INEOS Styrolution Group GmbH | PS (HIPS) | Styrolution PS |
| Abstron IM11B | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Jiangsu Sinarise JM9013 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| Pebax® MV 1074 SN 01 | Arkema | PEBA-Ether | Pebax® |
