Order Products : sales@su-jiao.com
Petrothene® NA952000
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dFEwo0_Petrothene-NA952000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene NA952000 is a low density polyethylene for use in both blow molding and injection molding applications. This resin exhibits excellent toughness, good softness and good dimensional stability. NA952000 is selected by customers for use in injection molding caps, closures, blow molding squeeze bottles and other specialty applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield 1 | 10.3 | MPa | |
| Break 2 | 10.8 | MPa | |
| Tensile Elongation 3(Break) | 650 | % | ASTM D638 |
| Flexural Modulus 4 | ASTM D790 | ||
| 1% Secant | 241 | MPa | |
| 2% Secant | 216 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 86.7 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 13 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 12N4013 | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| Buna® EP T 2450 | LANXESS Corporation | EPDM | Buna® EP |
| Plasmer 1055BM/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| Plenco 02311 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| Sylvin 2987-75 Clear 8422 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
